BPPGL - SF-80DV1 BLACK DEVELOPER

  • MSDS: BPPGL
  • Manufacturer: SHARP ELECTRONICS CORP
  • Product Name: SF-80DV1 BLACK DEVELOPER
  • National Stock Number: 6850-01-203-8607
Product Identification

Product ID:SF-80DV1 BLACK DEVELOPER
MSDS Date:12/22/1986
FSC:6850
NIIN:01-203-8607
MSDS Number: BPPGL

Responsible Party
SHARP ELECTRONICS CORP
SHARP PLAZA
MAHWAH, NJ 07430
US

Emergency Phone: 201-529-9223

Info Phone: 201-529-8200

Cage: 18520

Contractor
SHARP ELECTRONICS CORP.
MAHWAH, NJ 07430-2135 US

Telephone: 201-529-9223

Cage: 18520

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.3%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


NONHAZARDOUS INGREDIENTS CONSISTING OF INGREDIENTS 3-6


IRON; (IRON POWDER)

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 93.5%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3


KYNAR, 1,1-DIFLUOROETHANE HOMOPOLYMER; (DIFLUOROETHYLENE

CAS: 24937-79-9

Fraction By Weight: 0.5%


ACRYLIC ACID BUTYL ESTER POLYMER WITH STYRENE;

CAS: 25767-47-9

Fraction By Weight: 5.5%


SOLVENT BLACK 7; (NIGROSINE DYE)

CAS: 8005-02-5

Fraction By Weight: 0.2%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMUM IRRITATION TO RESPIRATORY TRACT MAY
OCCUR AS WITH EXPOSURE TO ANY NON-TOXIC DUST.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYTEM.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR IF EFFECTS OCCUR, CONSULT LOCAL
MEDICAL PERSONNEL. EYES: IMMED FLUSH WITH WATER FOR AT LEAST 15
MIN. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . INGEST:
CALL MD IMMED .

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL, FOAM OR WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . MATERIAL WILL BURN IN CASE OF FIRE.
Unusual Fire/Explosion Hazard:THIS MATERIAL HAS NO UNUSUAL FIRE OR
EXPLOSION HAZARDS.

Accidental Release

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS FOR
SAFETY REASONS.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NO.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:INHALATION SHOULD BE AVOIDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:5(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE, BLACK POWDER, ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO*2, NO*X.

Disposal

Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
UNDER CONDITIONS WHICH MEET ALL FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.